Connecting to an HT-A9

HT-A9 does not support the “Sony | BRAVIA Connect” app. Display the setting screen of the HT-A9 on the TV screen to operate the connection procedure.

The HT-A9 may not connect to the subwoofer until the software of the HT-A9 is updated.

  1. Turn on the HT-A9 as well as the TV, and switch the TV input to the HT-A9.

    It takes a while for the HT-A9 to start up. The operation can be performed when [HELLO] or [PLEASE WAIT] disappears from the display panel.

  2. Update the software of the HT-A9 to the latest version.

    The procedure for updating the software depends on whether the initial setup of the HT-A9 has been completed.

    Note

    • The Help Guide for the HT-A9 may suggest updating the software with the optional speakers connected to the HT-A9, but update the software of the HT-A9 without connecting the subwoofer.

    If the initial setup of the HT-A9 has already been completed (if you are already using it)

    1. Press HOME on the remote control supplied with the HT-A9 and select [Setup] - [Advanced Settings] - [Software Update] - [Network Update] on the home menu displayed on the TV screen.
    2. Follow the on-screen instructions on the TV screen to update the software.


    If the initial setup of the HT-A9 has not been completed (e.g., immediately after purchasing the HT-A9)

    1. Press HOME on the remote control supplied with the HT-A9 and follow the on-screen instructions that appear on the TV screen to begin the initial setup.
    2. When the [Easy Network Setup] screen appears, connect the HT-A9 to the Internet.
    3. When the screen confirming the execution of the software update appears, select [Yes] to execute the software update.
    4. Follow the instructions on the initial setup screen to complete all settings.


    Hint

    • You can also update the HT-A9 software to the latest version by downloading the latest software from Sony’s support page to a USB memory.
      For details, refer to the Help Guide for the HT-A9.
  3. Connect the AC power cord (mains lead) to the AC inlet on the subwoofer, then connect to the AC outlet (mains).

    When connecting the AC power cord (mains lead), there is no problem laying the subwoofer down. Handle the subwoofer carefully when laying it down.
    For information on installation, see “Related Topic” listed at the bottom of this page.

    BRAVIA Theatre Sub 9

    The BRAVIA Theatre Sub 9 has an AC inlet inside the hollow area which is on the bottom of the subwoofer.

    BRAVIA Theatre Sub 8

    The BRAVIA Theatre Sub 8 has an AC inlet inside the hollow area which is on the bottom of the subwoofer.

    AC power cord (mains lead) (supplied)

  4. Check that the power indicator on the subwoofer lights in white.

    When the power indicator lights in white, the connection between the subwoofer and the HT-A9 is complete.

    Note

    • The Help Guide for the main audio device (such as the HT-A9) may state that the power indicator lights in green, but the power indicator on the subwoofer is white.

    BRAVIA Theatre Sub 9

    BRAVIA Theatre Sub 8

    Power indicator

    If the subwoofer does not automatically connect to the HT-A9 or if you replace another subwoofer that is already connected to the HT-A9 with this subwoofer

    The subwoofer must be connected manually to the HT-A9.

    For instructions on how to connect manually, refer to “If the Speakers Are not Connected Correctly” in the Help Guide for the HT-A9. You can connect the subwoofer to the HT-A9 with the same operation.

    Note

    • If the optional rear speaker has been connected already, it must also be connected manually again.
  5. Press HOME on the remote control supplied with the HT-A9 and perform sound field optimization by selecting [Setup] - [Advanced Settings] - [Speaker Settings] - [Sound Field Optimization] in the home menu.
TP1002102718